Accessories; Safety Testing Approvals; Replacement Parts Information - Tuthill Fill-Rite 300V Serie Manual De Instalación, Operación Y Seguridad Del Propietario

Trouble Shooting (cont'd)
Symptom
Fluid leakage.
Pump hums but
will not operate.
Bold text indicates repairs that are not serviceable by the owner; pump must be returned
to the point of purchase for repairs.
* Repairs marked with an asterisk (*) will require Repair Kit #300KTF7794. This kit
includes a replacement rotor and new vanes, as well as a number of other important seals
and components to complete the repair. Details of this kit are on page 13.

Accessories

A wide variety of accessories are available to help you maximize the performance of your
Fill-Rite pump. Listed below are the applicable available accessories for your specific
product.
Please contact your authorized Fill-Rite distributor to purchase the accessories you need.
Part Number
F4010PM0
F4030M0
700ACCF7017
FRPA125
KIT700AS
FRH10012
FRH10014
FRHA10020
FRHMN100S
N100DAU13
N100DAU10
FRNA100DAU00
S100H315

Safety Testing Approvals

The Fill-Rite line of pumps have been safety tested for compliance to
the standards set forth by UL Laboratories (NOTE : Motor only on
BD310V bio-diesel model).

Replacement Parts Information

For repairs or routine maintenance, Fill-Rite offers the parts you need. The following parts
diagram and list covers all applicable parts for your Fill-Rite product. These parts can be
obtained through any authorized Fill-Rite dealer. Be sure to use only genuine Fill-Rite
replacement parts for your service and maintenance needs. For a list of authorized dealers,
please visit our web site at "www.fillrite.com".
Cause
1. Bad o-ring gasket.
2. Dirty shaft seal.
3. Bad shaft seal.
4. Incompatible fluid.
5. Loose fasteners.
1. Dirt in pump cavity.
2. Motor failure.
3. Broken rotor insert.
1" Filter Kit (Particulate 10 micron)
1" Filter Kit (Particulate 30 micron)
1" Filter Head
Island Pedestal Mount Kit
Anti-Siphon Kit
1" Hose (12')
1" Hose (14')
1" Arctic Duty Hose (20')
1" Nozzle Kit, Manual Leaded Spout
1" Auto Shut Off Nozzle (Ultra High Flow Diesel)
1" Auto Shut Off Nozzle (High Flow Diesel)
1" Auto Shut Off Nozzle (Arctic Duty - Diesel)
1" Multi-Plane Swivel
Check all o-ring gaskets.
Clean seal & seal cavity.
Replace seal.
Refer wetted parts list to fluid
manufacturer (see page 14).
Tighten fasteners.
Clean out pump cavity.
Return to place of purchase.
Remove all debris & replace insert.
Description
11
Cure