Erasing The Memory Of The Motor (Factory Default); Use And Maintenance; Use From The Application; Controlling Up, Down, My - SOMFY Zigbee Sonesse 28 WF Manual De Instrucciones

EN
Observations
The motorised product stops too soon. The end limits are incorrectly set.
The red LED of the control point lights
up

2.4.2.Erasing the memory of the motor (factory default)

Press and hold the motor head programming button until the motorised product
briefly moves up and down 3 times.
➔ All the settings are erased.

3.USE AND MAINTENANCE

3.1.Use from the application

The motor control and tilting control are possible from the application: follow the instructions on TaHoma application.
CONTROLLING UP, DOWN, MY: IN ROLLER MODE.

3.2.Controlling up, down, my

1] To move the motorised product from a limit to the other limit, briefly press
the UP or DOWN button.
2] To stop the motorised product, briefly press the MY button.
3] (If a my position is recorded) To move the motorised product to the my
position, briefly press the MY button.

3.3.Tips and advice on operation

3.3.1.Questions about the product?
Observations
The motorised product does not
operate.
The motorised product stops before its
end limit.

4.TECHNICAL DATA

Power supply
Radio frequency
6
Possible causes
The motorised product has exceeded
recommended weight limit.
Drive battery is low and requires charge.
Red LED blinks 3 times when any button
of a paired control point is pressed.
There is a setting error.
Possible causes
The control point battery is low.
Drive battery is low and requires charge.
Red LED blinks 3 times when any button
of a paired control point is pressed.
The thermal protection has activated.
Drive battery is low and requires charge.
Red LED blinks 3 times when any button
of a paired control point is pressed.
12 Vdc class 2 power supply SELV + LPS
2.4 GHz
Solutions
Reset the end limits with Set & Go
Connect application.
Replace motorised product.
Plug in the external battery to the
charger.
Proceed to section Drive settings [} 5]
1]
2]
Solutions
Check the battery and replace it as
required.
Plug in the external battery to the
charger.
Wait for the drive to cool down.
Plug in the external battery to the
charger.
©
Copyright 2021 SOMFY ACTIVITES SA. All rights reserved.
Sonesse 28 WF Zigbee
3x
3]