Reconnect A Device - Motorola krave ZN4 Guia Del Usuario

If your phone prompts you to ENTER PASSKEY, touch
the passkey field to show a dialpad. Enter the
passkey or PIN code for the device (usually set to
0000), then touch Done and touch OK. The other
device might ask you to enter the same passkey.
Note: See the instructions that came with your
device for the device PIN code and other
information about the device.
7 Touch Yes to confirm the connection.
When the connection is made, your phone shows the
the Bluetooth connection active status indicator
Tip: When your phone's Bluetooth power is on, it
shows the Bluetooth power on status indicator
it can automatically connect to a handsfree device you
have used before. Just turn on the device or move it
near the phone.
88 connections

reconnect a device

Note: Make sure the other device has Bluetooth
power on. Your phone can connect with only one
Bluetooth device at a time.
1 With the flip open, touch Menu
menu.
2 Touch Bluetooth
3 Touch DeviceList/NewDevice to show the devices your
phone has connected before.
4 Touch Connect next to the device name.
I
.
Note: Your phone will prompt you to turn on its
O
Bluetooth power if it is off.
and
5 If prompted, enter the passkey (usually set to
0000).
If the connection fails, try using Add New Device to find
and add the device as if it is new.
to open the
.