Pump With Mechanical Speed Variator; Cleaning; Specifications For Dismantling - Della Toffola S/P Instrucciones Originales

4.2

PUMP WITH MECHANICAL SPEED VARIATOR

After the first 3000 working hours we suggest replacing the lubricating oil
using the proper discharge and charge
Check the oil level periodically using the indicator positioned on one side.
We suggest the use of lubricating oil
DEXRON III D ALLISON, IP TRANSMISSION FLUID
4.3

CLEANING

The pump must be cleaned after use in order to preserve the mechanical and
sanitary features, mainly in case of transferring foodstuffs or pharmaceutical
products. In case of a short stop make the pump working for 1-2 minutes with
clean water and then empty the piping and the pump body. In case of long period
of rest, after emptying the pump, make the pump working for 5/10 seconds after
pouring some drops of
ATTENTION! - To clean the pump, the piping and the plant
(cistern, tank, etc.) when transferring foodstuffs or
pharmaceutical
standards of the relative field. Pay attention also in case
of handling toxic and corrosive products.
ATTENTION! - When cleaning the pump, do not use products that
are not compatible with stainless steel AISI 304/316, or with
the impeller materials. Do not get the electrical components
wet. Only use glycerin oil as an impeller lubricant.
4.4

SPECIFICATIONS FOR DISMANTLING

The pump is made of the following materials: rubber, plastics, steel,
stainless steel, aluminium and electric material. The disposal of the above
mentioned materials must be in accordance with the specifications in force
(2002/96/CE).
Type
VA MINOR / VA MAJOR
VA MAXI
GLYCERINE OIL on the impeller.
products
holes located on the variator sump.
SHELL DONAX TA type or similar (
).
Quantity of oil
0,5 kg
1,2 kg
please refer
27
AGIP GM
to the defined