Description Of The External Programming Interface; Space Requirements; Standard Installation Diagram; Installation - SOMFY Home Motion ROLLIXO RTS Manual De Instalación

Rollixo RTS

2.3 Description of the external programming interface

1
2
STOP
3
6 7 8
no. Description
1 Up button
2 STOP Button
3 Down button
4 Prog Button
5 Prog Indicator light
6 Motor and fall
protection warning light
7 Safety edge indicator
light
8 Battery indicator light
9 Cell indicator light

2.4 space requirements

60,6

2.5 standard installation diagram

Motor
fall protection
4
5
1 2 3 4
Prog
4
9
function
Opening the door
Stopping the door
Closing the door
Programming radio transmitters
Information on radio reception and
programming radio transmitters
Information on the status of the motor and
fall protection
Information on the status of the safety
edge and the safety edge transmitter
Information on the status of the battery
and the safety edge transmitter
Information on the status of the cells
182,7
157,7
receiver
safety edge
transmitter
safety edge

3 - instaLLation

3.1 Mounting the rollixo receiver

Ensure a suitable distance from the wall socket (2 m power supply
cable supplied).
It is advisable to install the receiver on the same side of the door as
the safety edge transmitter.
[1]. Remove the integrated light bulb.
[2]. Unscrew and remove the receiver cover.
[3]. Mark the drill holes.
[4]. Mount the receiver onto the wall.
[1]
[3]

3.2 Motor and fall protection wiring

The receiver must not be connected to the mains power supply
during connection to the motor.
> Motor wiring
[1]. Connect the motor to the receiver.
note: the motor's direction of rotation shall then be checked and reversed
if necessary.
M
L1 N L2
1 2 3 4
[2]. Lock the motor cable with the cable clamp provided.
The motor cable must be placed in the receiver's 230 V insulation
area.
230v insulation zone
[2]
[4]
24v insulation zone
Copyright © 2014 Somfy SAS. All rights reserved.