Operating Instructions - Alliance Laundry Systems UM100 Manual Del Usuario

Operation

Operating Instructions

1. Turn on the main power source (circuit breaker).
2. Close drain of wash compartment to be used.
Refer to Figure 7.
Figure 7
3. Turn on hot and cold water faucets to desired
temperature and fill compartment to top of
agitator fins. Refer to Figure 8.
Figure 8
18
4. Add detergent and bleach, if desired, to water.
Use ONLY liquid bleach.
5. On standard models, set wash timer for 1/2
minute to allow detergent/bleach to mix
thoroughly with water.
On car wash models, press START button and
allow wash cycle to run until detergent/bleach is
mixed thoroughly with water (about 1/2 minute).
6. Place washables in compartment. Distribute
evenly around agitator. Refer to Figure 9.
U142I
NOTE: Place stringy items such as mop heads in
laundry net to prevent blockage of drains.
U143I
Figure 9
U144I
F232113