Technical Data; Unpacking And Assembly; Assembling The Machine - Urrea TB812A Manual De Usuario

other construction activities may contain chemi-
cals, including lead. Wash your hands after
handling.
Some examples of these chemicals are:
Lead lead-based paints,
· Crystalline brick and cement dilica and other
masonry products,
· Arsenic and chrome from chemically sawn
wood.
The risk of exposure to these chemicals varies
depending on how often you do this type of
work. To reduce your exposure, work in a well
ventilated area with approved safety equip-
ment, such as dust masks that are specially de-
signed to filter microscopic particles.
FEATURES
KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
Your drill press has been designed for drilling
hales in wood, metal and plastics.
10
9
6
5
7
8
4
2
1
1. LED WORK LIGHT.
2. LASER.
3. TABLE.
4. CHUCK.
5. POWER SWITCH.
6. SWITCH KEY.
7. WORK LIGHT ON/OFF SWITCH.
8. LASER ON/OFF SWITCH.
9. DEPTH GAUGE.
10. DEPTH STOP LOCKING COLLAR.
11. FEED HANDLE.
12. TABLE ADJUSTMENT HANDLE.
13. BASE.
14. BEVEL SCALE.
14
11
12
3
14
13

TECHNICAL DATA

TB812A
CHUCK CAPACITY
SPINDLE TAPER
POWER
VOLTAGE-FREQUENCY
SWING
TABLE SIZE
SPINDLE SPEED
SPEED
CHUCK STROKE
WEIGHT
TC810
CHUCK CAPACITY
SPINDLE TAPER
POWER
VOLTAGE-FREQUENCY
SWING
TABLE SIZE
SPINDLE SPEED
SPEED
CHUCK STROKE
WEIGHT
TC9114
CHUCK CAPACITY
SPINDLE TAPER
POWER
VOLTAGE-FREQUENCY
SWING
TABLE SIZE SPINDLE SPEED
SPEED
CHUCK STROKE
WEIGHT

UNPACKING AND ASSEMBLY

This bench drill has been packed completely in
a box.
1. Unpack your drill and check its contents.
Separate all loose parts from their packaging
and check that all objects are found according
to their "loose parts table" to ensure that all
parts are contained before throwing away any
packaging.
2. Remove the protective oil that has been ap-
plied to the table and column. Use a grease re-
mover and household stains.
3. Apply a layer of wax paste to the table and
column to prevent dust. Clean all parts thor-
oughly with a clean cloth.

ASSEMBLING THE MACHINE

NOTE: Install the machine on a level and solid
surface.
1/2" (13 mm)
B16#
3/4 HP (550 W)
120 V ~ 60 Hz
10" (254 mm)
190 mm x 165 mm
610-2 800 r/min
5
2-1/3" (50 mm)
24,5 kg (54 lb)
1" (25,4 mm)
B22#
1 HP (750 W)
120 V ~ 60 Hz
17" (431,8 mm)
325 mm x 325 mm
200-3 600 r/min
16
3-1/7" (80 mm)
71,5 kg (157,6 lb)
1-1/4" (31,7 mm)
B22#
1-1/2 HP (1 100 W)
120 V ~ 60 Hz
20" (508 mm)
475 mm x 423 mm
228 - 2 380 r/min
12
3-1/7" (120 mm)
120 kg (264,5 kg)