Adding Your Camera To The Eagleeyes App - Velleman CAMIP16 Guía Rápida De Inicio

10.3 Adding Your Camera to the EagleEyes App

1. Establish a wireless connection between your mobile device and the
wireless router that has the camera connected.
2. Open the EagleEyes app and click the "+" button to add a new device.
3. Select "Local Network Search" to search for the camera.
4. Select the camera from the list. The settings page appears.
5. Change the port number of the camera as needed. The default port
number is 88. If port number 88 is blocked, you can change it to any
value between 1-9999 (for example 8080).
6. Write down the IP address and the port number of the camera. You
will need them later.
(In the sample screens below [A], the IP address is 192.168.2.197 and
the port number is 88.)
7. Press "Apply" to confirm your settings.
V. 02 – 10/12/2014
CAMIP16
The device will show a list
of devices on the network.
The displayed IP address is
the address that your
router assigned to your
camera.
10 ©Velleman nv