Care And Maintenance - Roadstar CLR-2477 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Temporary stop alarm: press [SNOOZE] (7) button to repeat next alarm after 9 minu-
tes.To stop alarm press [AL OFF] (6). Next alarm will be next day.
TO USE THE RADIO
1.
Press the [POWER] button (6) to power ON the unit;
2.
Adjust radio frequency to your desired station by pressing the [TUNING +/-] but-
tons (1/2). (If you hold tuning button it will scan until it finds the next station);
3.
Adjust the volume with the [VOLUME +/-] (5/4);
4.
To switch off the radio, press the [POWER] button (2).
Note: For a better reception reorient the antenna.
PRESETS
1.
Tune the desired station as explained above;
2.
Press and hold [PRESET] button (3) until "P" will flash;
3.
Press the [TUNING +/-] buttons (1/2) to choose the number;
4.
Press the [PRESET] button (3) to save the radio station.
RECALL A PRESET STATION:
Press the [PRESET] button (3) and then choose the number of the preset by pressing
the [TUNING +/-] buttons (1/2).
AUTO PRESET: In Radio mode, long press [POWER] (6) button, radio will be memo-
rize first 20 stations received.
SLEEP TIMER
The sleep timer switches the radio off automatically after an adjustable time. When
the radio is ON:
1.
Press [SLEEP] button (7) repeatedly to adjust the sleep shutdown time. You can
choose between 120-90-60-45-30-15-05-OFF;
2.
Sleep time will be confirmed if no button is pressed within 5 seconds.
CANCEL SLEEP TIMER
Press [SLEEP] button (1) repeatedly to select "OFF".
LED DIMMER
In Radio mode, long press [SNOOZE] (7) button to set LED lightness: light or dark.
USB CHARGING
To charge a USB device, using a USB cable (not included), connect a USB device
(e.g.smartphone, mp3 player) via to the USB port (8) on the back of this product. The
contents in the connected USB device cannot be accessed by this product.

CARE AND MAINTENANCE

To prevent fire or shock hazard, do not allow this clock radio to be exposed to rain or
moisture.
English
2
Tabla de contenido
loading

Tabla de contenido