Care And Maintenance - Roadstar CLR-2615 Manual De Instrucciones

Ocultar thumbs Ver también para CLR-2615:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
3
English
(5) (ALARM 1) or VOLUME + (6) (ALARM 2) until you see bb (buzzer),
radio or OFF.
LISTENING TO THE RADIO
1. Press shortly CLOCK/RADIO ON/OFF BUTTON (7) to switch the Radio
(FM/AM) ON manually.
2. Press 3 seconds the TUNING DOWN (2) OR TUNING UP (3) button to
start the Radio auto-tuning function (the unit will search automatically the
strongest stations).
3. Adjust the VOLUME Control VOLUME - (5)/VOLUME + (6) to a
comfortable listening level.
4. To search manually a Radio station, when in RADIO mode press TUNING
DOWN (2) OR TUNING UP (3) sequentially until the desired frequency is
displayed, press the M BUTTON (1) 3 seconds until "P01" flash, then press
TUNING DOWN (2) OR TUNING UP (3) button to store in the memory.
5. To listen the desired Radio stations, short press M BUTTON (1) to select
the stored station.
6. To turn off the radio, press 3 seconds
BUTTON (7).
Note:
For FM reception there is a built-in FM antenna wire at the rear of
the unit. Move the wire around to obtain the best reception.
SNOOZE FUNCTION
When the alarm sounds, pressing the SNOOZE/SLEEP BUTTON (4) will
temporary stop about 8 minutes then the alarm sounds again.
SLEEP FUNCTION
1. This function enables you to go to sleep listening to the Radio.
2. Press CLOCK/RADIO ON/OFF BUTTON (7) to switch ON the Radio.
3. Press 3 seconds the SNOOZE/SLEEP BUTTON (4). The clock display will
show 120/90/60/45/30/15/05 minutes. The Radio turns on and will turn off
automatically after the selected sleep timer.
4. To turn off the Radio at any time during the Sleep period, press CLOCK/
RADIO ON/OFF BUTTON (7).

CARE AND MAINTENANCE

To prevent fire or shock hazard, do not allow this clock radio to be exposed to
rain or moisture. This clock radio should not be exposed to direct sunlight,
very high or low temperature, moisture, vibration, or placed in a dusty
environment. Do not use abrasives, benzine, thinners, or other solvents to
clean the surfaces of the clock radio. To clean it, wipe with a mild non-
abrasive defergent solution on a clean soft cloth. Never attempt to insert
All manuals and user guides at all-guides.com
the CLOCK/RADIO ON/OFF
Tabla de contenido
loading

Tabla de contenido