Home Automation And Energy Consumption Operation; Management Of Alarms Detected On Iperbus - Urmet 1717/12H Manual De Instrucciones

2. HOME AUTOMATION AND ENERGY CONSUMPTION
OPERATION
2.1 HOW TO ACTIVATE SCENARIOS CONFIGURED IN IPERSET
on the Home Page. The following menu will appear if the Bus is set to ON:
Select
Select to access the scenarios list (up to 8). The scenarios to which a name has been assigned can be
activated. Select the required scenario to activate it. Select X to go back to the previous menu.

2.2 MANAGEMENT OF ALARMS DETECTED ON IPERBUS

The alarms detected on IPerBus are displayed on the MODO monitor in form of icons as shown in the
Alarms Table (see below "MULTIPLE ALARM DISPLAY PRIORITY" paragraph).
When an alarm occurs:
• The display will be switched on (if it was off) and the icon of the detected alarm will appear (a generic
alarm is shown below).
• The monitor will beep for 1 minute.
• The green envelope LED (
DS1717-008
RELAX
1
SCENARIO 2
2
ASSENZA
3
< >
4
< >
5
) will light up.
25