Tabla de contenido
Idiomas disponibles
Idiomas disponibles
CHECK
TIRE
PRESSURE
The tires on your tractor were over-inflated
at the factory for shipping purposes.
Co rrect
tire pressure
is tmportant for best cutting
performance.
• Reducetire
pressureto
PSI shown ontires.
CHECK
DECK
LEVELNESS
For best cutting
results,
mower
housing
should be properlyleve[ed,
See "TO LEVEL
MOWER"
in the Service
and Adjustments
section
of this manual.
CHECK
FOR PROPER
POSITION
OF
ALL
BELTS
See the figures that are shown for replacing
motion and mower
blade drive belts in the
Service and Adjustments
section of this man-
ual. Verify that the belts are routed correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor,
check to see that the brake is operating prop-
erly, See"TO CH EC K BRAKE" in the Service
and Adjustments
sectton
of th_s manual.
t_CHECKLIST
Before
you operate your
new
tractor, we
wish to assure
that you receive
the best
performance
and satisfaction
from
this
Quality Product.
Please review the following
checklist:
All assembly
instructions
have
been
completed.
No remaining
loose parts in carton.
q/" Battery
is properly
prepared
and
charged.
J
Seat is adjusted
comfortably
and tight-
ened securely.
J
All tires are properly
inflated.
(For ship-
ping p urposes, the tires were overinflated
at the factory).
J" Be sure mower deck is properly leveled
stde-to-side/frent-to-rear
for best cutting
results.
(Tires must be properly inflated
for leveling).
1/" Check mower and drive belts,
Be sure
they are routed properly around pulleys
and inside afl belt keepers.
_" Check wiring.
See that all connections
are still secure and wires
are properly
clamped.
Wh_le learning howto useyour tractor, pay ex-
tra attention to the following
im portant items:
Engine oil is at proper level.
Fueltankis
filled with fresh, clean, regular
unleaded gasoline.
J" Become
familiar
with all controls,
their
location
and function.
Operate
them
before you star the engine.
Be sure brake system is in safe operating
condition.
Be sure Operator
Presence
System and
Reverse
Operation
System
(ROS) are
working properly (See the 0 peration and
Maintenance
sections
in this manual).
12
Tabla de contenido
