Inspection Of The Breaker - Canon image PRESS C10000VP Guía Breve

▀

Inspection of the Breaker

This machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once a month
by following the procedure below.
1
Turn OFF the main power.
• Make sure that the main power is turned OFF, before inspecting
the breaker.
2
Push the test button located on the rear of the machine.
• Push the test button with the tip of a ball-point pen or a similar
object. Briefly push the test button.
3
Confirm that the breaker dial is in the OFF (" " side)
position.
• If the breaker dial does not turn to the OFF position, repeat step
2. If the breaker dial does not turn to the OFF position, despite
carrying out the above procedure two or three times, contact
your local authorized Canon dealer.
4
Turn the breaker dial all the way down until it stops.
Cleaning and Maintenance
37