Samsung SMT-190D Serie Manual De Usuario página 26

USER'S MANUAL
DSL User (PPPoE)
- Constituted by IP on PPPoE (DSL)
SMT-190DN products can be used on the network using
IP through PPPoE (DSL). In case of a configuration using
PPPoE, SMT-190DN connection is made through the
domain names (EX : http://wff0000.websamsung.net) that
are automatically registered in Samsung's DDNS server.
You do not need to enter IP address, Subnet Mask and
Gateway in the network tab of Admin Mode.
1) Connect as in the figure below and turn on the power
of each piece of equipment in the following order.

) MOVE TO EACH item by using / key, and /
KEYchange the set value.
) Move to 'PPPoE...' by using NETWORK ACCESS.
Press ENTER SWITCH to set to PPPoE.
PPPoE. ACCESS
DNS 1
DNS 
USER ID
USER PWD
) When accessing the PPPoE (DSL), type in the User
Name and Password (and Confirm Password) given
to you by the DSL Service Provider.
Caution
When using DSL (ISP-internet service provider) you
must type correct User Name and Password to
connect to SMT-190DN. If you type an incorrect User
Name or Password, communication is impossible.
 ID and PASSWORD
5) USER ID and PWD (Password)are limited to 0 digits
maximum. Only numerals,@symbol and small
characters can be used.
Capital letters are not supported.
6) DNS 1 and DNS  will be automatically set to DNS as
shown above.
 
07/07/07 00:00:01
168. 16. 6. 1
168. 16. 6. 
*************
*************
*************
*************
7) Use / KEY to change it.
8) After setting, move to the main screen by using the
MENU button.
9) Set values will be stored as shown below.
It takes 0 to 5 seconds.
07/07/07 00:00:01
NETWORK SETTING
10) You can view the video source of the SMT-190DN
from a remote PC.
11) Open your Internet Explorer web browser, type in the
following in the URL window and press ENTER.
http://wff0000.websamsung.net
For example, if your SMT-190DN MAC address is
ff0001, then type in ff0001 instead of ff0000. W is
a fixed letter that must be typed in. This will ensure
connection to the monitor.
Note
MAC Address.
Locate the MAC Address of the SMT-190DN (each
SMT-190DN has its own unique MAC address)
It can be checked in "5-9) NETWORK SETUP" of
SETUP MENU'.
It is the last 6 digits as shown below.
 At this time, you should add "w" in front of "mac
address".
Caution
If you change the HTTP port number 80 to 1025, then
you must type in as the address bar below.
http://wff0000.websamsung.net:1025
Eng-6
CAM1
07/07/07 00:00:01
NETWORK SETTING
1. NETWORK ACCESS STATIC...
. HTTP PORT 00080
. PICTURE QUALITY NORMAL
NETWORK STATUS
IP ADDR 19.168.1.
GATEWAY 19.168.1.65
SUBNETMASK 55.55.55.0
DNS 1 168.16.6.1
DNS  168.16.6.
MAC ADDR 00:0:6f:ff:00:00
DDNS ADDR wff0000.websamsung.net
07/07/07 00:00:01