Post Items
1
Uni-Anchor Base Plate
2
Base Plate Tabs
3
Adjuster Screw
4
3/4 inch Pin
5
Sleeve
6
Tri-Screws
7
Section 1 Pin
8
Section 2 Pin
9
Section 3 Pin
10
Swivel Tie Off Rings (3)
11
Davit Anchor Ring
12
Extension Sleeve
13
Anchor Post Extension (Accessory)
14
Anchor Point Eye
15
Carrying Handle
Optional Anchor Post Davit Arm Assembly
16 3/8" Pin Assembly
17 Davit Anchor Eye
18 Cable Assembly
19 U-Bracket
20 Carabineer
21 Davit Arm Sleeve
22 Davit Arm Receiver Tube
23 Head Pin Assembly
24 Clamp Screw Knobs
25 Davit Head Assembly
26 Mounting Brackets
1.0 APPLICATION
1.1
PURPOSE: DBI-SALA's Advanced Portable Fall Arrest Post is designed as an anchorage connector for a
person(s) working at a height to provide protection against fall hazards. Various accessories address a
variety of fall arrest requirements, as well as confi ned space entry/retrieval and rescue needs.
1.2
LIMITATIONS: The following application limitations must be recognized and considered before using this
product:
A.
CAPACITY: The Portable Fall Arrest Post is designed to be used as an anchorage connector for up
to three persons. The maximum combined weight (including clothing, tools and equipment) of each
person is 300 lbs. (136 kg). Use of various accessories may reduce the number of workers that may be
anchored.
B.
APPLICATION RESTRICTIONS:
IMPORTANT:
Always install the Portable Fall Arrest Post to the following strength requirements to avoid potential
incompatability with different models:
Moment Requirement
190,000 in-lbs (20.8 kN-m)
*
Install to this strength requirement whenever possible to avoid potential imcompatability with different models
•
A maximum of three (3) persons may be tied off to the Advanced Portable Fall Arrest Post at any one
time. Use of various accessories may reduce the number of persons that may be anchored. Consult
Figure 1 - Advanced Portable Fall Arrest Post
23
25
19
16
22
26
18
17
20
21
8
5
4
2
Vertical Load Requirement
3,100 lbs force (13.8 kN)
3
14
13
12
Section 3
11
10
9
24
Section 2
6
7
15
Section 1
3
1