DBI SALA 8560155 Manual De Instrucciones página 11

4.0 MAINTENANCE - SERVICING - STORAGE
4.1 Clean the Advanced Portable Fall Arrest Post with a mild soap detergent solution. Excessive build-up of dirt,
tar, etc. may prevent the system from working properly. If you have any questions concerning the condition
of your Advanced Portable Fall Arrest Post or have any doubt about putting it into service, contact Capital
Safety immediately. Refer to manufacturer's instruction for maintenance, servicing, and storage procedures
of subsystem components.
4.2 Additional maintenance and servicing procedures (i.e. replacement parts) must be completed by a factory
authorized service center. Authorization must be in writing.
5.0 SPECIFICATIONS
MATERIALS:
MATERIALS AND FINISH: Zinc plated or powder coated, 6061-T6 aluminum anodized, steel anchor plate
Hardware: Grade 5/Grade 8 zinc plated.
CAPACITY: The maximum working load for this product is three persons with a combined weight of 300 lbs.
(136 kg) per person.
STATIC LOAD CAPACITY: Strength of system maintains a minimum safety factor of 2 as required by
OSHA when according to this user instruction manual (reference OSHA 1926.502 and 1910.66).
WEIGHT: Post 38 lbs. (17.5 kg); 14 inch extension 5 lbs. (2.2 kg); rescue davit 20.5 lbs. (9.3 kg)
SIZE (COLLAPSED): 33 inch (840mm) height
SIZE (EXTENDED): 57.5 inch (1460mm) height
6.0 LABELING
The following labels must be securely attached and full legible:
A
B
A
A
4
7
78
2
A
B
5
B
A
11
B
B
A
B
B
A