Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Picture -02
01 - Motor
02 - Pedal Lock.
Before doing any maintenance in the machine switch it OFF and
3. Operation
3.1 Starting
The Blender is activated by turning the On/Off Switch Nº03
(Pic.01) to ON position.
3.2 Operating Procedures
The High Performance Tilting Blender works at high speed
(approximately 3.500 rpm, 50Hz). To feed it proceed as follows:
1 – Remove the Lid Nº01 (Pic.01).
2 – Put product inside the Cup Nº02 (Pic.01) with the machine
switched OFF.
3 – Place the Lid Nº01 (Pic.01) back on top of the Cup and
switch the machine ON.
01
02
IMPORTANT
unplug it.
04
Tabla de contenido
