Tabla de contenido
Idiomas disponibles
Idiomas disponibles
...overload the motor with big or heavy portions as it will make the blender´s life shorter. if
motor stops, turn it off immediately, unplug and remove part of the load before start
operating again.
3 . Operation
3.1 Starting
When placing or withdrawing the Bowl be sure the motor has stopped .
Before to switch the blender ON , adjust the desired speed using the speed
control knob No. 08 (Pic 01) . Not knowing the best speed to be used, use then the
maximum speed .
Minimum speed is 12,000 rpm and maximum speed is 38,000 rpm.
After to adjust the speed turn ON the blender using the ON/OFF Switch No.
06 ( Pic 01 ) .
Pulse Switch on the right side of the motor housing strots the blender amd
will keep it running as long as it is pressed.
3.2 How to Feed the Blender
The TA-04 GOURMET Blenders are machines working at high speed (
approximately 38.000 rpm off load ) .
To feed it observe the following instructions :
Cut the product in small pieces , about 1.5 inches wide , such precaution helps
to decrease the blending time process , mainly when working with frozen products . When
working with ice it is recommended to join a little water .
Withdraw the Lid No.01 (Pic.01) .
Place the product inside the Bowl No.02 (Pic.01) .
Close the Bowl with the Lid , and Switch ON the machine .
The necessary processing time will be different for each kind of
NEVER SWITCH ON THE MACHINE BEFORE LOADING ITS
BOWL , BECAUSE IRREPARABLE DAMAGE WILL RESULT .
Important
Observation
IMPORTANT
03
Tabla de contenido
