LG DLEX6001W Manual Del Propietário página 39

FILLING THE STEAM FEEDER (CONTINUED)
Before using a Steam Cycle, the steam feeder must be filled with
water up to the MAX line. If not, the
ADD WATER light will blink. Make sure that the steam feeder is
filled with water and the cartridge is completely connected. Turn
the dryer off then restart the Steam Cycle.
Only use water. Do not fill the steam feeder with foreign
substances, rinse agents, or detergents.
Before moving the dryer, make sure the steam feeder is empty.
Do not use distilled water; the water level sensor in the steam
generator will not work.
Be careful while filling the steam feeder to avoid overflow and
spilling.
Wipe up any spilled water around the steam feeder and the
drawer before starting the dryer.
WARNING
cleaning solvents, or other flammable or explosive substance
They give off vapors that could explode.
severe burns.
or other flammable or explosive substances. They give off vapors
that could explode.
steam cycle.
normal.
blanket, leather jackets, silk, wet clothes, lingerie, foam products,
or electric blankets.
not overload.
optimal results.
allow steam to stay in the drum.
Otherwise, an error message will be displayed.
39
HOW TO USE