Reversing the door
WARNING
To avoid damage to the dryer or the door, support the door with a stool
or box that fits under the door, or have an assistant support the weight of
the door.
Avoid dropping the door to avoid damage to the door or the floor.
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow
the instructions below can result in damage to the dryer,
property damage or injury to persons.
catch side by gently prying up with a flat blade screwdriver.
Hole cap
each hinge. Set the door aside face down on a protected
surface to prevent damage to the door or the work surface.
Hinge Screw
on each side of the door and lift off the inner door frame
using a flat blade screwdriver. Remove the latch hook and
blank and move them to the opposite side.
inner door frame
latch hook
INSTALLATION INSTRUCTIONS
Remove the two plastic cover caps. Reinstall the hinges
and cover caps on the opposite sides from which they were
removed.
the inner door frame onto the outer door frame with the screws
properly aligned and that the door closes and latches correctly.
Swing Door
15
Hinge
assembly
Cover cap