Panasonic CQ-RX400U Guía De Mejora Del Sistema página 13

Bluetooth ® (continued)
Pairing Bluetooth ® Hands-Free Device
1 Press [SRC] to select the Bluetooth
mode.
Press [] to select the Bluetooth HF
2
mode.
lights.
When pairing for the fi rst time:
3 Hold down [SEL] for
2 sec. or more.
Pairing setup mode
4 Press [BAND].
(Blinks.)
Operate the Bluetooth ® device to pair it with this unit.
Operation will differ according to the device; the following is just a representative example.
For details, see the instruction manual of the device being used.
 Select "Menu > Settings > Connectivity > Bluetooth > Search for audio enhanc." from the cellular phone (Bluetooth
Hands-Free Device).
 The cellular phone (Bluetooth Hands-Free device) searches for other nearby devices.
Select "Panasonic BT200" from the search results screen.
 Input the PIN code for this unit.
The default PIN code for this unit is "0000".
 When "Do you want to connect to the detected device?" appears on the cellular phone screen (Bluetooth Hands-
Free Device), select [Yes].
"PAIRED" is displayed on this unit.
Once paired with this unit, connect the cellular phone to the unit.
24
CQ-RX400U/CQ-RX200U
When changing from an already When changing from an already
paired device but not connecting: paired device and connecting:
The name of the device is displayed.
3 Hold down [SEL] for
Hold down [SEL] for
3
2 sec. or more.
2 sec. or more.
The name of the already paired
device is displayed, followed by The name of the already paired
"CONNECT". device is displayed, followed by
"DISCONN.".
4 Press [SEL].
Press [SEL].
4
5 Press [BAND].
Press [BAND].
(Blinks.) 5
(Blinks.)
( page 28)
Notes:
• Devices cannot be paired with this unit if another
Bluetooth ® device is already connected to it.
If a Bluetooth ® device is connected to this unit when
pairing is started, the connection is automatically
deleted and pairing begins.
• The PIN code may be referred to as a "Passcode",
"Passkey", "PIN", or other term, depending on the
device.
• Depending upon devices to be paired, it may be
necessary to conduct hands-free pairing in fi rst.
Before changing the PIN code for this unit:
• Separate 4-digit PIN codes can be set for Bluetooth ®
Audio and Hands-Free devices.
®
• The default PIN code for both the Bluetooth Audio and
Hands-Free modes is "0000".
• PIN codes cannot be changed if this unit is paired with a
device. First, delete the paired device. ( page 26, 29)
®
• The Bluetooth device with over 5-digit PIN code is not
operated with this unit.
Set the mode of the device whose PIN
1
code you want to change.
Bluetooth Hands-Free or Bluetooth Audio mode
2 Hold down [VOL] (PUSH
SEL: Select) for 2 sec. or
more to open the menu.
Press [VOL] (PUSH SEL:
3
Select) to select PIN CODE.
4 Press [] and [] to change the
fl ashing digit in "0000".
[]: Move the fl ashing digit to the left.
[]: Move the fl ashing digit to the right.
5 Press [BAND].
The new PIN code is registered.
• Once hands-free pairing has been completed with
this unit via operation from the cellular phone itself,
®
it is automatically disconnected and a Bluetooth
connection is initiated from this unit. Accordingly,
"Disconnected" may appear on the cellular phone
screen, but if you wait, the cellular phone will be
automatically reconnected.
• "TIME OUT" is displayed and the previous state is
restored if 2 minutes elapse in the pairing setup mode
®
without detecting a Bluetooth device.
25
CQ-RX400U/CQ-RX200U