Gewiss CHORUS GW 16 972CB Manual De Programación página 45

The thermostat only uses Access Point mode to receive the domestic network configuration that it
must connect to for normal operation; once activated, the device creates its own Wi-Fi network to
which it connects via the specific app, using a mobile device and sending the network configuration
to the thermostat (see "Access to the domestic network and Internet"). When the configuration has
been received, the device restarts; it deactivates Access Point mode in order to connect to the
domestic network.
If the Wi-Fi module is disabled, the device can no longer communicate with the remote server and it
can no longer be managed via the app.
USER INSTRUCTIONS
Activating Wi-Fi Access Point mode (AP)
Press the button key to access value change; after the
access, the current parameter value is displayed.
Activate/deactivate the Wi-Fi Access Point mode of the device
(0 = disabled; 1 = enabled) via the circular touch slider or the
push-button. The parameter is only displayed if the Wi-Fi module
(P 40) is active. To confirm the set value, press the button key
within thirty seconds; expiry of the time-out (30 seconds) or
pressing the push-button
without saving it.
Activating the Wi-Fi radio module
Press the button key to access value change; after the
access, the current parameter value is displayed.
Activate/deactivate the Wi-Fi radio module of the device (0 =
disabled; 1 = enabled) via the circular touch slider or the
button. To confirm the set value, press the button key
thirty seconds; expiry of the time-out (30 seconds) or pressing the
push-button result in exiting the change page without saving
it.
45
result in exiting the change page
E
N
G
L
I
S
H
push-
within