USER INSTRUCTIONS
"Advanced" parameters
OFF setpoint setting (building protection)
Press the
button key to access value change; after the
access, the current parameter value is displayed. Adjust
using the circular touch slider or the push-button
the
heating or cooling building protection
setpoint
, depending on the type of operation selected. To confirm
the set value, press the
button key within thirty
seconds; expiry of the time-out (30 seconds) or pressing
the push-button
result in exiting the change page
without saving it.
Setting the temperature measurement unit
Press the button key
to access value change; after the
access, the current parameter value is displayed. Select the
temperature measurement unit (°C = Celsius; °F =
Fahrenheit) through the circular touch slider or the push-
button
. To confirm the set value, press the
button
key within thirty seconds; expiry of the time-out (30
seconds) or pressing the push-button
result in exiting
the change page without saving it.
Display back-lighting intensity
Press the button key
to access the change to the display light
intensity percentage level; after the access, the current parameter
value is displayed. Adjust the value using the circular touch slider
or the
push-button (the range can be set from 30% to 100%).
To confirm the set value, press the
button key within thirty
seconds; expiry of the time-out (30 seconds) or pressing the push-
button
result in exiting the change page without saving it.
38