Gewiss CHORUS GW 16 972CB Manual De Programación página 34

Pages relating to the thermostat (control type: HVAC)
Pages relating to the thermostat (control type: set-point)
USER INSTRUCTIONS
Choosing the HVAC mode (auto, pre-comfort, comfort,
economy or OFF)
If the set control type is HVAC mode, press the
key to select
,
(AUTO,
Each time the
selected HVAC mode is shown for a moment.
Temporarily forcing the set-point
If any HVAC mode other than OFF is active, by actioning the
circular touch slider it is possible to temporarily change the
setpoint of the active HVAC mode and then confirm this with
the button key, or wait until 5-second time-out has
expired. The use of the forcing function is indicated by the
icon. It remains active until the HVAC mode is changed (or
until there is a variation in the profile, if the mode is AUTO).
Choosing the operating mode (Automatic, Manual or
OFF)
If the set control type is setpoint, press the
to select the required operating mode; in Manual mode, the
AUTO and OFF icons are disabled.
Each time the
the selected mode is shown for a moment.
Setting the operating setpoint in Manual mode
If Manual mode is active, you can use the circular touch
slider to modify the value of the operating setpoint.
34
the required
,
or OFF).
button key is pressed, the setpoint of the
button key is pressed, the set-point of
button
HVAC mode
button key