Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Sideburner
[]
Loosenside burner in side shelf. (B). To loosen, unscrew and remove two front screws hoiding
sideburner in place. {A), Note: Do not loosen electrode screw.
D
Remove the 2 prednstalled screws from the valve stem and set them aside. (C)
D
Insert valve stem through hole in fascia. (D) Affach bezel to fascia and valve face with previously
removed 2 screws. Attach bezel with black mark facing up (E}.
[]
Place sideburner tube over the valve, making sure that valve is inside sideburner tube. (F)
[]
Pushcontrol knob onto sideburner valve stem. (G)
[]
Reaftach sideburner to sideburner shelf with the 2 previously removed screws, Replace sideburner
grate. (H}
D
Insert the small tips of the four main control panel wires into four of the five module sockets. Insert the
small tip of the side burner wire into the fifth socket. For the other wire with larger tips, attach the
two-wire tip to the module bare terminal. Attach the other tip to the terminal on top of the sideburner
control valve. (l)
[]
Unscrew igniter cap from control panel. Insert (1) AA battery (provided in blister pack) into battery
slot with positive end (+) facing outward. Screw igniter cap back onto panel, (J)
24 °23678-41100309
Tabla de contenido
