Attaching The Fan Blades - Home Decorators Collection 68681 Guía De Uso Y Mantenimiento

Assembly - Hanging the Fan (continued)
6

Attaching the fan blades

NOTE: The blades must be installed before attempting to operate
the fan. If the blades are not installed, the motor will not function
properly.
□
Attach a blade (G) to a blade bracket (J) using the decorative
nuts (CC) and blade attachment screws (AA) provided. Insert
a blade attachment screw (AA) through a hole in the blade
(G) and the blade bracket (J) and into the decorative nut (CC).
Repeat for the two remaining holes in the blade (G).
□
Tighten each screw (AA) securely.
□
Repeat these steps for the remaining blades.
Assembly - Attaching the accessories
1
Attaching the switch cup adaptor
□
Remove one screw (QQ) from the black bracket below the
fan motor assembly (D). Loosen, but do not remove the
other two screws.
□
Align the key hole slots in the switch cup adaptor (H) with
the two screws in the black bracket.
□
Turn the switch cup adaptor (H) clockwise until the two
screws are situated in the narrow end of the keyholes.
□
Re-install the one screw (QQ) that was removed in the first
step. Tighten all three screws firmly.
2
Attaching the switch cup
□
Remove one screw (UU) from the side of the switch cup
adaptor (H). Loosen but do not remove the other two
screws (UU).
□
Align the "L" shape holes on the switch cup (E) with the
screws on the switch cup adaptor (H). Turn the switch
cup (E) to hold it in position.
□
Install the other screw (UU) that was removed in the
first step. Tighten all three screws (UU) securely.
G
D
H
QQ
D
11
Please contact 1-800-986-3460 for further assistance.
AA
J
D
CC
UU
H
E
HOMEDEPOT.COM/HOMEDECORATORS