Maintenance Schedule - Nilfisk-Advance Captor 4300 Instrucciones De Uso

A-22 / ENGLISH

MAINTENANCE SCHEDULE

Keep the machine in top condition by following the maintenance schedule closely. Maintenance intervals given are for average operating
conditions. Machines used in severe environments may require service more often.
Perform the "After Use" maintenance steps
Check fi lter indicator and lights (hyd & air)
Drain / Check / Clean Tanks & Hoses
Purge Detergent System (AXP/EDS only)
Check / Clean Hopper Dust Control Filter Using Method "A"
*Inspect and grease steering rack
Check / Clean Hopper Dust Control Filter Using Method "B"
Check / Clean Hopper Dust Control Filter Using Method "C"
Change the hydraulic "charge" oil fi lter
Change reservoir hydraulic oil and fi lter
Engine fuel fi lter(s) gas or propane
*See the Mechanical Repair Service Manual for detailed maintenance information of systems listed. (Sweeping, Hopper, Steering, Dust
Control, Squeegee)
FIGURE 3
A-22 - FORM NO. 56041580 - Captor
MAINTENANCE ITEM
Check parking brake
Check engine oil
*Clean main and side brooms
Check engine coolant level
Check hydraulic oil level
MAINTENANCE ITEM
*Rotate main broom
Clean solution fi lter
*Inspect/adjust brooms
*Inspect broom housing skirts
*Inspect hopper seals
Clean radiator and oil cooler
Perform engine maintenance
Flush the radiator
4300, 4800, 5400 / CR 1100, 1200, 1400
™
PERFORM DAILY PERFORM WEEKLY
X
X
X
X
X
X
X
X
15 hrs. 30 hrs. 150 hrs. 300 hrs.
X
X
X
X
X
X
X
X
X
X
X
500 hrs. 1000 hrs.
X
X
X
X
X
revised 11/07