13. Advanced functions
Switch the alarm control unit to MAINTENANCE mode (see system guide).
Open the TYDOM 2.0 unit.
To change from DHCP to a fixed IP
- Press and hold the T3 button for at least 3 seconds until the T1 LED starts flashing slowly.
- Release the button within 15 seconds.
To delete the password of the TYDOM application
- Press and hold the T3 button for at least 15 seconds until the T1 LED starts flashing rapidly.
- Release the button within 30 seconds.
To RESET TYDOM 2.0
(Use of DHCP, deleting the password, deleting associations, deleting current defects, restoring
factory settings)
- Press and hold the T3 button for at least 30 seconds, TYDOM emits a long beep.
- Release the button
T1
62
T3