Activation - DELTA DORE TYDOM 2.0 Manual De Instalación

1- Place TYDOM 2.0 on the wall mount.
2- Attach the unit with the 2 screws
Ø 4 mm max. using holes C.

3.6 Activation

Strictly follow the order of the steps described below.
1- Connect TYDOM 2.0 to the ADSL box using the
Ethernet cable supplied (IP connection).
2- Open the SIM card holder,
slot the SIM card in then lock the holder as
shown on figure 1.
3- Insert the antenna using the spanner supplied
and attach it with the double-sided tape (figure 2)
4- Insert the battery the right way round (polarity)
(figure 3).
5- Connect the power lead and plug
TYDOM 2.0 into the wall.
6- The exterior LED lights up red
(for other LEDs, refer to § 7 of this document
Figure 3
ADSL BOX
1
2
1
).
2
Figure 1
Exterior
LED
4
1
Cable
aperture
45
C
3
Figure 2
2
5
3
EN