Configurations - WEG EIO1 Guía De Instalación, Configuración Y Operación

Table 5.1 (cont.): Specification of the digital inputs and outputs
Pin assignment
XA101
23 C_RL3
DOn06
NA_
24
25 C_RL2
DOn05
NA_
26
27 C_RL1
DOn04
NA_
28
Note: The letter n, used in the description of the digital inputs and outputs, corresponds to the number of the slot to
which the accessory is connected. For example: if the accessory is connected to slot 1, the digital inputs mentioned in
the table above will be DI101 to DI112 and the digital outputs will be DO101 to DO106.

6 CONFIGURATIONS

To configure the digital inputs and outputs, refer to the programming manual of the SCA06.
Description
RL3
RL2
RL1
Digital Input and Output Expansion Module - EIO1
Function
Digital relay
outputs
Specification
Vmax: 250 Vac
30 Vdc
Imax.: 3 A
ton/off_max: 10 ms
Useful life: 100,000
operations
SCA06 13