Storage; Service And Repair; Disposal - RIDGID RP 210 Manual De Instrucciones

RP 210 Press Tool
Battery Packs
Catalog
No. Capacity Region
44693 18V 2.0 Ah North & Latin America, Australia
44698 18V 4.0 Ah North & Latin America, Australia
43323 18V 2.0 Ah Europe & China
43328 18V 4.0 Ah Europe & China
31013 18V 1.1 Ah North & Latin America, Australia
32743 18V 2.2 Ah North & Latin America, Australia
31018 18V 3.3 Ah North & Latin America, Australia
32473 18V 1.1 Ah Europe & China
28218 18V 2.2 Ah Europe & China
28448 18V 3.3 Ah Europe & China
All listed batteries will work with any model RBC 20 charger. The difference
between batteries for different regions is in label markings.
RBC 20 Advanced Lithium Battery Chargers & Cords
Catalog
No. Voltage
43458 120V
43333 230V
43468 120V
44418 230V Australia & Latin America
44793 100V
44833 230V
44798 — North America Charger Cord
44808 —
44803 —
44813 — Australia & LA Charger Cord
44818 —
44828 — United Kingdom Charger Cord

Storage

Remove battery from tool and store tool and battery in
case. Avoid storing the tool, batteries or charger in extreme
heat or cold. The tool temperature sensor will not allow the
tool to turn on if oil temperature is not within the temper-
ature range of 0°F (-20°C) to 104°F (40°C). So it may be
neces sary to allow the tool to warm or cool to a temper-
ature within the operating range by placing it in a condi-
tioned room before use. This will be indicated by a red
glowing LED on the display panel.
Store the carrying case in a dry, secured,
WARNING
locked area that is out of reach of children and people
unfamiliar with the RP 210 Press Tool. The tool is dan-
gerous in the hands of untrained users.
10
Plug
Region Type
North America
Europe
China
Japan
United Kingdom
Europe Charger Cord
China Charger Cord
Japan Charger Cord

Service And Repair

Improper service or repair can make machine
unsafe to operate.
Service and repair on this RP 210 Press Tool must be per-
formed by a RIDGID Authorized Service Center. The tool
fasteners have been marked to indicate if service has
been performed by unauthorized individuals.
For any repairs or maintenance, contact the Ridge Tool
Technical Service Department at (800) 519-3456 or
www.RIDGID.com for nearest authorized press tool ser-
vice outlet.
For information on your nearest RIDGID Independent
Service Center or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com or www.RIDGID.eu to find
your local RIDGID contact point.
A
• Contact Rdge Tool Technical Service Department at
C
[email protected], or in the U.S. and
A
Canada call (800) 519-3456.
I
A

Disposal

G
A
Parts of the RIDGID RP 340 Press Tool contain valuable
C
materials and can be recycled. There are companies
A
that specialize in recycling that may be found locally.
I Dispose of the com ponents in compliance with all appli-
cable regulations. Contact your local waste management
A
authority for more information.
G
For EC Countries: Do not dispose of elec-
trical equipment with household waste!
According to the European Guideline 2002/ -
96/ EC for Waste Electrical and Electronic
Equipment and its implemen tation into nation-
al legislation, electrical equipment that is no
longer usable must be collected separately and disposed
of in an environmentally correct manner.
WARNING