GD115
99011-36H51-01D
position with the spring adjuster. Position 1 provides the
softest spring tension and position 5 provides the stiffest.
This motorcycle is delivered from the factory with its
adjuster set on position 2.
WARNING
The rear suspension springs on the left and right
sides must be placed in the same position.
Improper adjustment will affect ride stability.
REAR BRAKE PEDAL
Press on the rear brake pedal to
engage the rear wheel brake. The
brake light will also be engaged.
KICK START LEVER
Located on the right side of the
engine.
WARNING
After the engine is started, inspect whether the
kick lever has been returned to its normal
position.
V01 Export
ENG
2014-08-11
WARNING
Do not start with the kick lever when the
motorcycle is supported on the side stand rather
than the main standard.
TOOL KIT
The tool kit is located in the tool box below the right
cover. It can be taken out after the tool box cover of is
opened.
PARKING STAND
The motorcycle is equipped with
both a main stand and a side stand.
Main stand 1
To support the motorcycle with the
main stand, tread on the main
stand 1 rod, hold the steering
handlebar with your left hand,
grasp the handle 3 with your right
hand and pull the motorcycle
upward to a standstill.
Side stand 2
The side stand is for temporary parking. Leave your
11
1 Main stand
2 Side stand
3 Handle