Suzuki GD115 Manual Del Propietário página 57

GD115 99011-36H51-01D
WARNING
Failure to use and failure to turn off the turn
signals can be hazardous Other drivers may
misjudge your course and this may result in an
accident. Always use the turn signals when you
intend to change lanes or make a turn. Be sure to
turn off the turn signals after completing the turn
or lane change.
DIMMER SWITCH 4
"'" position
The headlight low beam and taillight will light up.
"9" position
The headlight high beam and taillight will light up. The
high beam indicator on the dashboard will also be lit.
CAUTION
Holding the dimmer switch between "9" and "'"
position will turn on both "9" and "'" headlight
beams. This operation
motorcycle.
Use the dimmer switch only at "9" and "'"
position. Do not stick tape on the headlight or
place objects in front of the headlight.
V01 Export ENG 2014-08-11
can damage the
CHOKE LEVER 5
(A)
To make starting convenient, the motorcycle is provided
with a choke. During a cold engine start, pull the choke
lever to the position (A) and open throttle grip slightly to
start the engine. After the engine is started, pull back the
choke lever by half to position (B) and open throttle grip
slightly to make the engine continually preheat until it
reaches the required temperature. Finally, pull the choke
lever back to its original position (C). During a hot engine
start, put the choke lever in position (C).
RIGHT HANDEL SWITCHES
ENGINE STOP SWITCH 1
The engine can only start up
when the switch is placed at the
"*" position, and the ignition
circuit is connected. If the switch
is at the "%" position, the
ignition circuit is cut off. This is
an emergency stop switch.
THROTTLE GRIP 2
The engine speed is controlled by the position of the
throttle grip. Turn it toward you to increase engine speed.
8
(B) (C)