Rear View - 1byone 471NA-0006 Manual De Instrucciones

Included Items
EN
1 x Stereo Turntable
DE
1 x Power Adaptor
1 x Instruction Manual
FR
Before using the turntable for the first time, check the package contents to
ensure all parts are free of visible damage.
ES
Getting Started/Main Operation
IT
Connecting AC Adaptor
1. Plug the AC adapter into a normal power outlet.
2. Insert the DC plug of the AC adapter cord into the DC INPUT Jack at the
back of the turntable.

REAR VIEW

Note:
1. Only use the supplied adapter.
2. Please ensure that your outlet voltage is compatible before using this
turntable.
Switching On For The First Time
Press the Standby button to turn on the unit. The Standby indicator will
light up in full brightness. To turn the unit off, press the Standby
again and the Standby indicator will change to half brightness.
Switching Between Phono/USB Sources
After turning on the turntable, toggle the Function selector to switch the
sound source between Phono and USB.
Adjusting Sound Volume Level
After turning on the turntable, rotate the Volume control dial to adjust the
level of sound volume.
To Wall Outlet
button
05
Power Management Function
The turntable will automatically go into standby mode after 15 minutes
without sound output or operation. To resume operation, simply press the
Standby button to turn the turntable back on.
Listening to the Phono
Gently Open The Dust Cover
1. Lift the Dust Cover all the way up until it stops. The cover will stay open.
2. Remove the tie-wrap from the Tone Arm (when using for first time).
3. Remove the white protective needle cover by gently pulling it forward.
4. Release the tone arm Hold Down clip by gently pushing to the right. This
will unlock the Tone Arm from its arm rest.
NOTE: Re-lock the Hold Down clip when moving the unit to another location.
Turntable Operation
1. Toggle the Function selector to the Phono position.
2. Set the Speed selector to the correct position (33, 45 or 78 RPM).
3. Place the record on the turntable.
4. Lift the Tone Arm control lever and move the Tone Arm to the desired
starting point over the record.
5. Lower the Tone Arm control lever. The Tone Arm will move down and music
will start playing.
6. Turn the Volume control dial to adjust the volume to the desired level.
7. Rotate the Pitch control dial knob to adjust the selected speed at the range
of +/-8%.
8. Toggle the Auto Stop control switch to choose the auto stop function.
9. At the end of the record, the Tone Arm will stop automatically. You should
return the Tone Arm to the Tone Arm Rest manually.
06
EN
DE
FR
ES
IT