Festo EGC-TB-KF Instrucciones De Utilizacion página 26

EGC-TB-KF, EGC-HD-TB
• Please select the corresponding accessories from our catalogue (
Foot mounting
HPE (only for EGC-...-TB-KF)
Attach foot mounting to the
threads and centring holes 1
( Fig. 1) in the bearing caps
Tab. 1
• Tighten the mounting screws evenly with the following tightening torque.
Size
Screw HPE
MUE
NST
Tightening HPE
torque
MUE
NST
Tab. 2
For installation in a vertical or inclined position:
Warning
Injury to people and material damage!
If there is a power failure or if the toothed belt
breaks, the work load will slide down.
• Make sure that you only use motors with an
integrated spring-loaded holding brake.
• Check whether additional external safety
measures against damage due to breaking of
the toothed belt are required (e.g. toothed
latches, moving bolts or emergency buffers).
26
Profile mounting
MUE
Profile mounting in the slot of
the mounting surface 8
50 70
M4 M5
M3 M5
M4 M5
[Nm] 2.9 5.9
[Nm] 1 5
[Nm] 2.9 5.9
www.festo.com/catalogue).
Slot nut mounting
NST
Slot nut mounting in slot aA. If
the device is tilted, the slot nuts
can slide into any position of the
profile in the slot (for EGC-50:
insert slot nuts laterally)
80 120 125
M5 M8 –
M5 M8 M5
M5 M8 M5
5.9 24 –
5 20 5
5.9 24 5.9
Fig. 5
Festo – EGC-TB-KF, EGC-HD-TB – 1112a English
160 185 220
– M10 –
M5 M8 M8
M5 M8 M8
– 47 –
5 20 20
5.9 24 24