6 | Installation
4.5
Installing/Removing the Bosch Control
Installing
2.
Fig. 6
Installing the Bosch Control
▶ Hook the Bosch Control to the back of the wall plate [1].
▶ Press the bottom of the Bosch Control against the wall
plate until you hear a "click" [2]. The Bosch Control is now
locked.
Removing
2.
1.
Fig. 7
Removing the Bosch Control
▶ Unlock the Bosch Control by pressing the unlock button [1]
under the front edge.
▶ Tilt the bottom of the Bosch Control up and remove it [2].
6720816118 (2015/08)
1.
1.
1.
6720810446-30.1Wo
6 720 804 655-006.0N
4.6
Using for the first time
4.6.1 Software updates to the Bosch Control
The software is updated automatically, over your internet
connection. Straight out of the box the Bosch Control may not
have the latest software installed, as a result, the full App
functionality may not yet be supported. The installed software
version can be checked on the cleaning screen ( section 7.1,
page 10).
4.6.2 Starting up the Bosch Control
▶ Turn on the boiler, this provides power to the Bosch
Control.
▶ Remove the plastic screen protector.
The Bosch Control and boiler will connect automatically
( fig. 8):
•
During the connection phase, the boiler, Wi-Fi and internet
connection icons are present.
•
The Bosch Control establishes a connection with the boiler
(shown by a check mark [2] next to the boiler connection
icon [1]).
02.13.00
1
Fig. 8
Connection with the boiler
4.6.3 Connecting to the Wi-Fi network and internet
The Bosch Control can only connect to "visible"
networks. If the network that the Bosch Control
has to connect to is a "hidden network", this will
have to be made "visible". After connection is
made, the relevant network may be "hidden"
again.
•
Once connected to the boiler, the Bosch Control will
automatically look for Wi-Fi networks [1] ( fig. 9).
•
The Wi-Fi networks possibilities are displayed [2].
2
02.13.00
Bosch Control