Programming The Channels Of The Telis 6 Chronis Rts - SOMFY Telis 6 Chronis RTS Manual Del Usuario

5.3. Programming the channels of the Telis 6 Chronis RTS

5.3.1. Naming a channel
Channels can only be named in manual mode.
1) Make sure that the Telis 6 Chronis RTS is in manual mode (if it is in automatic mode, briefly press
the selection button ( ) to switch to manual mode).
2) Select the channel you want to customise using the
arrow buttons ( or ).
3) Press and hold the selection button (
appears on the screen: "SET" mode is activated: the
flashing hyphen corresponds to the character to be
edited.
4) Select the location of the character to be edited using
the navigation buttons ( or ): the flashing hyphen
corresponds to the character to be edited.
5) Briefly press the selection button (
in this location.
6) The character flashes: to select another character, press
the arrow buttons ( or ).
The 5 characters can be alphabetic (A to Z) or numeric
(0 to 9).
7) Briefly press the selection button (
character displayed and move to the next character.
8) Repeat steps 4 to 7 for each of the characters in the
channel's name.
9) Press and hold the selection button (
mode is deactivated, and the Telis 6 Chronis RTS returns to manual mode.
Naming the other channels
- Repeat steps 1 to 9 for each channel you want to customise.
5.3.2. Assigning or deleting end-products in each channel
The procedure for assigning end-products to the channels of the Telis 6 Chronis RTS and deleting
them is identical. It can only be done in manual mode.
1) Make sure that the Telis 6 Chronis RTS is in manual
mode (if it is in automatic mode, briefly press the
selection button ( ) to switch to manual mode).
2) Press and hold the PROG button on the individual RTS
control point that has already been linked, until the
end-product moves back and forth: programming mode
is activated for 2 minutes.
3) Use the arrow buttons (
the Telis 6 Chronis RTS to be programmed.
4) Briefly press the PROG button on the Telis 6 Chronis
RTS: the end-product moves back and forth, and it is
assigned to or deleted from the chosen channel on the
Telis 6 Chronis RTS.
- In order to assign or delete the end-product from other
channels, repeat steps 1 to 4, selecting another channel.
- To assign or delete other end-products, repeat steps 1 to 4.
Copyright © 2010 Somfy SAS. All rights reserved.
) until "SET"
) to edit the character
) to save the
) until "SET" is no longer displayed on the screen: "SET"
or ) to select the channel on
Telis 6 Chronis RTS
2 3
4 5
6 7
2
Individual RTS
control point
3
4
Telis 6 Chronis RTS
5