Automatic Mode - SOMFY Telis 6 Chronis RTS Manual Del Usuario

Telis 6 Chronis RTS

7.2. Automatic mode

Automatic mode on the Telis 6 Chronis RTS is used to:
• Automatically control the end-products assigned to the 6 different channels, using automatic
orders programmed according to the days of the week
• Program the activation or deactivation of the Sun function
Example of programming a day in winter: at 06:45, e order to gently open the roller
shutters of the parents' bedroom ("ROOM1"); at 07:00, c order to open all the roller
shutters and blinds on the ground floor and take advantage of the sunlight ("LIVIN",
"DININ", and "KITCH"); at 07:45, e order to open the roller shutters of the children's
bedroom ("ROOM2"); at 09:00, c order to open the roller shutters of the bedrooms
and allow the heat to enter via the windows ("ROOM1" and "ROOM2"); at twilight, a
order to all end-products to protect the house from the cold.
- Programming the automatic orders for
each day of the week (see "Programming
the days of the week" section).
- In automatic mode, the current day and
the next automatic order scheduled for that
day are displayed.
- To view all automatic orders that have
been programmed, scroll from one to the
another using the arrow buttons ( or ).
- To stop an automatic order that is in
progress, return to manual mode by
briefly pressing the selection button ( ),
select the channel corresponding to the
end-products concerned and press the
stop/my button.
7.2.1. Modifying the programming of the days of the week
See "Programming the days of the week" section.
7.2.2. Activation/Deactivation of the Sun function
The Sun function can only be activated in automatic mode, by programming an
When an automatic order is programmed for one day of the week, Somfy recommends that
an order is also programmed later the same day, in particular if other automatic orders are
programmed subsequently.
In automatic mode:
• If an automatic order is programmed, this means that, at the indicated time, the motors or
receivers linked to one or more RTS sun sensors will take the orders generated by these sensors
into account. The end-products concerned will react according to the amount of sunlight, until the
next automatic order.
• If an automatic order is programmed, this means that, at the indicated time, these motors or
receivers will cease to take the orders from the RTS sun sensors into account.
The Sun function is only active in automatic mode. As soon as the Telis 6 Chronis RTS switches
to manual mode, this function is automatically deactivated. It can only be activated at the next
programmed automatic order.
10
, according to the channels
Copyright © 2010 Somfy SAS. All rights reserved.
automatic order .