Idiomas disponibles
Idiomas disponibles
Tabla de contenido
ADF140666
Installation Instructions – Luminaire WaveStream
Instructions d'installation - Luminaire WaveStream
Instrucciones de instalación de la luminaria WaveStream
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards involved.
Cooper Lighting assumes no responsibility for claims
brought about by improper or careless installation or
handling of this product.
ATTENTION
Receiving Department: Note actual fixture description
of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly
with carrier. Claims for concealed damage must be
filed within 15 days of delivery. All damaged material,
complete with original packing must be retained.
CAUTION
Edges May Cut. Handle with care.
INSTALLATION
Fixture Installation/Wiring
1.
Remove product from packaging material. Carton
should be lying down flat, oriented with THIS SIDE UP
markings facing up so that top panel of carton can be
folded back and fixture can be lifted straight up out of
packaging materials. Do not lift fixture by one end or
pull on the end plates in any way. Luminaire should be
handled by both aluminum side rails. Wear clean work
gloves to prevent dirt and oil from being transferred to
luminaire.
2.
Note that the protective plastic insert that is shipped
in the luminaire is intended to stay in the luminaire for
protection of the lenses during installation (Figure1.).
Take caution when handling the luminaire to not
scratch or damage the lenses inthe fixture.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
NOTICE
Green ground screw provided in proper location. Do not
relocate.
NOTICE
If supply wires are located within 3 inches of ballast, use
wire rated for at least 90°C (194°F).
Figure 1.
Brand Logo
reversed out of
black
INS #
INS #
Plastic Insert
Tabla de contenido
Manuales relacionados para Eaton Metalux WaveStream
Resumen de contenidos para Eaton Metalux WaveStream
- Página 1 Brand Logo reversed out of black INS # INS # ADF140666 Installation Instructions – Luminaire WaveStream Instructions d’installation - Luminaire WaveStream Instrucciones de instalación de la luminaria WaveStream IMPORTANT: Read carefully before installing fixture. CAUTION Retain for future reference. Risk of burn. Disconnect power and allow fixture to cool before changing bulb or handling fixture.
- Página 2 Installation Instructions – Luminaire WaveStream Install the luminaire into the ceiling T-grid system. Ensure that luminaire sets snuggly in T-grid system (Figure 2.). Ensure that all luminaires in an area are oriented in the same direction. When required, attach EQ Clips to luminaire end plate with supplied screws to secure luminaire to T-grid system (Figure 3.).
- Página 3 Installation Instructions – Luminaire WaveStream Final Luminaire Prep Additional Cleaning Methods Fingerprints and large dust particles can be removed by The luminaire is shipped with a protective plastic insert gently wiping the surface with a clean microfiber cloth. If that is intended to stay in the luminaire during building additional cleaning is required a mild solution of distilled construction to keep dust and dirt from accumulating on water and Dawn®...
- Página 4 Instructions d’installation - Luminaire WaveStream MISE EN GARDE IMPORTANT : Lisez attentivement avant d'installer le luminaire. Conservez pour une référence future. Risque de brûlures. Mettez l’alimentation électrique hors tension et laissez refroidir le luminaire avant de le manipuler AVERTISSEMENT ou de changer la lampe. Risque d'incendie, de décharge électrique, de coupures AVERTISSEMENT et autres accidents.
-
Página 5: Installation Du Câble
Instructions d’installation - Luminaire WaveStream Retirez la plaque d'accès électrique et retirez les pièces défonçables de la plaque d'accès pour attacher le câble d'alimentation électrique (Figures 4 et 5). Retirez les deux vis de l’enceinte électrique et vérifiez l’étiquette du pilote pour consulter les caractéristiques électriques et le bon câblage du pilote DEL. - Página 6 Instructions d’installation - Luminaire WaveStream Préparation finale pour le luminaire Méthodes de nettoyage additionnelles Les traces de doigts et les grosses particules de Le luminaire est livré avec une gaine de plastique pro- poussière peuvent être enlevées en essuyant doucement tectrice à...
-
Página 7: Instalación
Instrucciones de instalación de la luminaria WaveStream PRECAUCIÓN IMPORTANTE: Lea atentamente antes de instalar la luminaria. Conserve estas instrucciones para tenerlas como Riesgo de quemadura. Desconecte la alimentación y deje referencia futura. que la luminaria se enfríe antes de cambiar la bombilla o manipular la luminaria. -
Página 8: Diagramas De Cableado
Instrucciones de instalación de la luminaria WaveStream Cuando así sea necesario, sujete los ganchos EQ a la placa trasera de la luminaria con los tornillos incluidos para asegurar la luminaria al sistema de vigas en T (Figura 3.). Tenga cuidado de no ejercer demasiada Placa de acceso torsión en los tornillos o de quebrarlos. -
Página 9: Mantenimiento
Instrucciones de instalación de la luminaria WaveStream Preparación final de la luminaria Métodos de limpieza adicionales Pueden quitarse las huellas digitales y las partículas de polvo grandes frotando suavemente la superficie con La luminaria viene con un tapón de plástico protector que un trapo de microfibra limpio.