Eaton Metalux AP VT Serie Instrucciones De Instalación

IB519083EN
Installation Instructions – AP VT
Instructions d'installation – AP VT
Instrucciones de instalación – AP VT
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
INSTALLATION
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE
WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED.
Ensure that power is disconnected before beginning
installation.
1. Remove all protective packaging materials from the
luminaire.
2. Thread 1/2" water tight conduit fitting (customer
supplied) into universal hub on end of luminaire.
(Figure 1)
N Not: For installation in wet locations, apply thread
sealant to all fitting threads and use a backup
wrench when tightening any fitting to the hub. If
the second conduit hub will not be used, remove
the threaded plug, apply thread sealant, and
reinstall using backup wrench
Figurt 1.
Surface Mount
3. Secure mounting clips to ceiling using 4 screws
(customer supplied). Space the clips 16.5 inches apart
for 2 foot luminaire, or 35.5 inches apart for 4 foot
luminaire. (Figure 2)
Figurt 2.
4. Orient the luminaire so conduit fitting faces incoming
supply power or conduit. Align the recesses in
luminaire body with mounting clips and apply gentle
upward pressure to secure luminaire onto both
mounting clips. (Figure 3)
Figurt 3.
Brand Logo
reversed out of
black
INS # INS #