Replacing The Oven Burner Nozzle; Replacing The Plate Burner Pilot Light Nozzle - Angelo Po 1G0TP0 Manual De Uso E Instalación

REPLACING THE OVEN BURNER NOZZLE

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Undo the scr ews (A) and remo ve the control
panel (B).
3 - Unscrew the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
4 - Replace the control panel (B) on completion of
the operation.

REPLACING THE PLATE BURNER PILOT LIGHT NOZZLE

To carry out this ope ration, proceed as fol-
lows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the scr ews (B) and remo ve the control
panel (C).
IT
4 - Unscrew the union (D).
GB
DE
FR
ES
English
C
A
- 28 -
A B
5 - Remove the nozzle (E) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
6 - Retighten the union (D).
7 - Replace the control panel (C) and the knobs (A)
on completion of the operation.
B
C
IDM-39606200400.tif
E
D
IDM-39618701800.tif