Replacing The Plate Burner Nozzle - Angelo Po 1G0TP0 Manual De Uso E Instalación

REPLACING THE PLATE BURNER NOZZLE

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the scr ews (B) and remo ve the control
panel (C).
4 - Unscrew the nozzle (D) and replace it with the
REPLACING THE TOP BURNER NOZZLE
To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Remove the grid (A).
3 - Extract the burner (B).
C
A
B
A
- 27 -
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the control panel (B) and the knobs (A)
on completion of the operation.
B
D
4 - Unscrew the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the burner and the grid.
IDM-39618701600.tif
IT
GB
DE
FR
ES
8
C
IDM-39618701700.tif
English