Use And Operation; Recommendations For Use - Angelo Po 1G0TP0 Manual De Uso E Instalación

SAFETY WARNINGS FOR ELECTRICAL EQUIPMENT
The electrical e quipment has been designed and
constructed in accordance with the relevant regula-
tions. These regulations consider operating condi-
tions in relation to the surrounding environment.
The list specifies the conditions required for the cor-
rect operation of the electrical equipment.
– The room temperature must not be less than 5°C.
– Relative humidity must be between 50% (meas-
ured at 40°C) and 90% (measured at 20°C).
– The place of installation must not be a source of
electromagnetic interference and radiation (X-
rays, lasers, etc.).
– The room must not have area s with concentra-
tions of gas or powders which are potentially ex-
plosive and/or represent a fire hazard.

RECOMMENDATIONS FOR USE

Important
The rate of accidents deriving from the use
of appliances depends on many factors
which cannot always be foreseen and con-
trolled. Some accidents may be caused by
unpredictable environmental factors, while
others are due above all to the behaviour of
users. As well as receiving authorisation
and appropriate instruction, if necessary,
the first time they use the appliance, users
must carry out a few simulated practice op-
erations in order to get to know the controls
and the main functions.

USE AND OPERATION

– The products and materials used during produc-
tion and maintenance must not contain contami-
nants or corrosives (acids, chemicals, salts, etc.)
and must not be able to penetrate and/or come
into contact with the electrical components.
– During transport and storage, the a mbient tem-
perature must be between -25°C and 55°C. How-
ever, the electrical equipment may be exposed to
a temperature of up to 70°C, provided the expo-
sure time does not exceed 24 hours.
If it is not possible to comply with one or more of the
conditions listed, essential for corr ect operation of
the electrical equipment, agr eement must be
reached in the contract con cerning the additional
features required to create the most suitable condi-
tions (e.g. special electrical components, air-
conditioning equipment, etc.).
Use only as intended by the constructor
and never tamper with any device to obtain
performance levels outside the rated speci-
fications. Before use, check that the safety
devices are properly installed and in good
working order. As well as taking care to
meet these requirements, users must also
implement all safety regulations and read
the description of the controls and the
start-up procedure carefully.
- 9 -
4
IT
GB
DE
FR
ES
English