Wittur Eco BUS Manual De Instrucciones página 35

20.4.2 'F2': Profile Data
F1 Door Movement
F2 Coupler Movement
F3 Reopen Time
F4 Next F8 Back
This menu allows you to call up 2 further cascading menus: 'F1' Door Movement (10.4.3) und 'F2' Coupler
Movement (10.4.5).
20.4.2.1 'F3': Reopen Time
Reopen Time is the waiting period after the re-open in open end, before the door close again.
By pressing 'F3' the parameter Reopen Time can be watched and changed.
Reopen Time:
0000.0 s
ENTER Ch.
To enter a new value press the number keys, after that press 'ENTER' . This value is taken over in a
buffer and carried out.
Reopen Time:
0001.5 s
ENTER Ch.
By leaving this menu with 'F8' you will be asked if the entered value shall be stored permanently to the
memory
Use changed Value?
YES/NO F8 Back
By pressing the keys 'YES' / 'NO' the value can be used / rejected.
20.4.2.2 'F4': Next (Profile Data)
F1 Reset to Default
F2
F3
F4
The door parameter are resetted to its initial value by pressing the button 'F1' .
Sujeto a cambios sin previo aviso
F8 Back
F8 Back
F8 Back
EXCELLENCE IN COMPONENTS
3411.32.0100 ed.0
GB
Pag.33.78
Subject to change without notice!