Olivetti ECR 5500 Guía De Referencia Rápida página 4

3. SET YOUR LANGUAGE
1. Open the printer compartment cover and slide the control switch to the PRG position.
2. Type [11] followed by [1] and [RA/FC] to print in French, [11] followed by [2] and [RA/FC] to print in German,
[11] followed by [3] and [RA/FC] to print in Spanish or [11] followed by [4] and [RA/FC] to print in Dutch.
To print in English again, type [11] followed by [0].
3. Program another feature or exit the program mode by sliding the control switch to the OFF position.
Example: Program the cash register to print in French.
Type/Press:
[11] + [1] + [RA/FC]
4. PERSONALIZE THE RECEIPT HEADER
1. Open the printer compartment cover and slide the control switch to the PRG position.
2. Switch the cash register to the receipt header definition mode by pressing the [#/NS] key repeatedly until
displaying the message "H01" indicating the first line of the receipt header.
3. Select the receipt header line that you wish to personalize by pressing the [Department 1/9] key repeatedly until
displaying the desired line number on the left-hand side of the operator display. Remember that a total of four
header lines can be personalized. You can scroll backward through the receipt header lines by pressing the
[Department 5/13] key repeatedly.
4. Using the Character Code Table provided in the Appendix of the Instructions Manual. type the character code
string for the letters to be entered on this particular line selected. Remember that up to 24 characters can be
entered. If you wish to center a writing, you will need to calculate the empty character spaces before and after
your string and type the appropriate blank space code (00) in the corresponding places.
5. Press the [Check] key again to store the newly defined header line. This new line is automatically printed.
6. Repeat steps 3, 4 and 5 if you wish to program the remaining three programmable header lines.
7. Exit from this programming sequence by pressing the [Amt Tend/TOTAL] key.
8. Program another feature or exit the program mode by sliding the control switch to the OFF position.
Example: Change the third line of the default header to *PLEASE COME AGAIN* with the appropriate spaces
before and after to center this new string using the Character Code Table provided in the Appendix of the Instruc-
tions Manual.
Type/Press:
[#/NS] + [#/NS] + [#/NS] + [#/NS] + [Department 1/9] + [Department 1/9] + [01 00 00] +
[56 52 45 41 59 45 00] + [43 55 53 45 00] + [41 47 41 49 54] + [00 00 00 01] + [Check] + [Amt Tend/TOTAL]
5. PROGRAM A CURRENCY EXCHANGE RATE
1. Open the printer compartment cover and slide the control switch to the PRG position.
2. Type the identification number [1 to 4] corresponding to the foreign currency exchange rate that you wish to
define.
3. Type the [decimal point position] of the exchange rate (0-8 digits after the decimal point).
4. Type the [decimal point position] of the converted amount (0-3 digits after the decimal point).
5. Type the [exchange rate] using up to six digits without specifying any decimal point.
6. Press the [Sub Total] key to store the exchange rate.
7. Program another feature or exit the program mode by sliding the control switch to the OFF position.
Example: Program the first exchange rate as 1 GBP = 1.419 EURO.
Type/Press:
[1] + [3] + [2] + [001419] + [Sub Total]
2