Identification - Plate Data (Fig. 2); Transport (Fig. 3); Receipt And First Cleaning; Installation And Environmental Conditions (Fig. 4) - Arneg Lisbona Vertical Guía De Instalación Y Manejo

2
3
4
6
5
7
8
The weight of water vapor in dry air is one of the main points that affect the performance and power
consumption of the cabinets
Declaration of
A copy of the conformity statement is annexed to the cabinet
conformity
If you lose the original copy of the Declaration of Conformity supplied with the cabinet,
download a copy by filling out the form available on the internet addresses:
- for Italy: http://www.arneg.it/conformita/it
- overseas: http://www.arneg.it/conformita/en

4. Identification - Plate data (Fig. 2)

On the back of the cabinets a plate with the following characteristics data is present:
1. Name and address of the manufacturer
2. Name and length of the cabinet
3. Cabinet code number
4. Cabinet serial number
5. Supply voltage
6. Power frequency
7. Input current
8. Electric power absorbed during the refrigeration phase (Fans + hot cables + lighting)
9. Electric power absorbed during the defrosting phase (Hot cables + fans + evaporators + lighting)
10. Lighting power (where foreseen)
11. Net display surface
12. Net load volume
13. Type of refrigerant fluid with which the plant operates
14. Environment climatic categories and reference temperature
15. Protection class against humidity
16. Job order number with which the cabinet has been manufactured
17. Order number with which the cabinet has been produced
18. Cabinet year of production
In case of technical assistance, in order to identify the cabinet communicate the following:
- the product name (2); the serial number (4); the job order number (16)

5. Transport (Fig. 3)

The cabinets are provided with a wooden support fixed to the base for moving with fork lift trucks.
Use a suitable manual or electric fork lift truck for lifting the cabinet in question.

6. Receipt and first cleaning

On receiving the cabinet:
- make sure that the packaging is integral and no evident damage is present;
- remove the packaging with care so as not to damage the cabinet;
- check all parts of the cabinet ensuring that its components are integral;
- if damaged, immediately call the supplier;
- use neutral products for a first cleaning of the cabinet. Dry with a soft cloth, do not use abrasive substances
or metallic sponges
- do not use alcohol or similar products for the methacrylate parts (plexiglass).
For a correct disposal of the packaging take into consideration that it consists of:
Wood - Polyester - Polythene - PVC - Cardboard.
In compliance with the EEC 94/62 directive the suitability of the materials stated above is declared.

7. Installation and environmental conditions (Fig. 4)

For installation, follow the instructions below:
05060030 03 30-07-2015
22
25
30
27
40
35
23,9
65 15,2
60 16,7
55 20,0
70 21,1
40 23,9
75 30,0
55 14,3
Lisbona
English
10,8
12,0
14,8
15,8
18,8
27,3
10,2
41