Kenwood HM-L700 Manual De Instrucciones página 16

Listening through headphones
Insert the headphone plug into the headphones jack.
÷ Headphones with a stereo mini plug can be con-
nected.
÷ The sound from all speakers are cut off.
Muting the sound temporarily (MUTE)
Only from the remote control unit
÷ Press again to resume the original volume.
÷ This is also canceled when the volume is changed.
Tone adjustment
The lower and higher frequency bands can be
adjusted independently.
1
Select the frequency band.
Main unit
Each press switches the operation.
1
"BASS" (low frequency) adjustment
2
"TREBLE" (high frequency) adjust-
ment
3 Original display
(Go to step 2 within 20 seconds.)
2
Adjust.
Main unit
(To adjust the other frequency band, repeat steps
1 and 2 for it.)
÷ The levels of both "BASS" and "TREBLE" can be ad-
justed in 2 steps in the range between – 8 and +8.
÷ The TONE and EX.BASS feature cannot be active at
the same time.
16
EN
Blink during the mute
Remote control unit
Remote control unit
Enhancement of bass (EX. BASS feature)
Main unit
Each press switches the mode as follows.
1 "EX.BASS" lights
Low frequency sounds are enhanced.
"EX.BASS ON" appears on the display.
2 "EX. BASS" goes off
Sound is enhanced by the TONE control.
"SOUND MODE OFF" appears on the
display.
÷ The TONE and EX.BASS feature cannot be active at
the same time.
Set the balance. (BALANCE feature)
This feature balances the sound between the left and
right speakers.
1
Press the mode key.
Main unit
2
Use 4 and ¢ to select "BALANCE" and
press the enter/demo key.
Main unit
Remote control unit
3
Use 4 and ¢ to set the balance and
press the enter/demo key.
Main unit
Remote control unit
Basic use method
Remote control unit
Remote control unit
\
\
\
\