tain no moving parts and therefore very little maintenance is required
other than to ensure that there is no excessive build-up of dust/dirt
on the reflectors or emitters as this can cause overheating and pre-
mature emitter failure. To clean the appliance, wipe off with a damp
cloth.
7. MAINTENANCE
The lamps used in the Girosole are robust and if knocks and shock
vibrations are avoided, they will last for around 5000 hours. When
changing the lamps, also the silicon bumpers connected with each
lamp must be substituted. They should be substituted even before
if there are signs of aging. Due to the special sealing and anti-shock
design of the heater, the emitters are not intended to be user re-
placeable. Please ensure that all emitters are replaced via the Mo-El
service network.
The accumulation of limestone or incrustations reduces the life and
the efficiency of the lamps; it is suggested therefore to avoid the
continued use in presence of water or salt fog. Eventual leavings of
salt water will have to be removed before the use, after having dis-
connected the appliance, by means of soak in sweet water.
8. ENVIRONMENTALLY COMPATIBLE DISPOSAL OF THE APPLIANCE
This product conforms to EU Directive 2002/96/EC.
This appliance bears the symbol of the barred waste bin. This indi-
cates that, at the end of its useful life, it must not be disposed of as
domestic waste, but must be taken to a collection centre for waste
electrical and electronic equipment, or returned to a retailer on pur-
chase of a replacement.
It is the user's responsibility to dispose of this appliance through the
appropriate channels at the end of its useful life. Failure to do so may
incur the penalties established by laws governing waste disposal.
13