MO-EL GIROSOLE 769 Manual Del Usuario página 12

10. Fit the unit to the ceiling by means of the 6 screws supplied,
without tightening.
11. Pull the cable so as to straighten it inside the tube.
12. Tighten the 6 fixing screws into the ceiling.
13. Tighten the Allen screw.
14. Insert the white plastic cover into the hole in the centre of the
Girosole (fig. 13).
5. USE
The essential element of the heater is the halogen filled quartz linear
lamp with a tungsten element. The heater operates at full output al-
most immediately. The heating reaches a distance of about 4-6 me-
ters around the appliance (fig. 10).
Every lamp can be switched on with its switch (fig. 6). Before press-
ing the switch, seize firmly the grip and avoid to touch the metal
parts. Ensure that the heater is aiming its warmth into the target area
by adjusting heater angles as necessary by using the adjustment de-
vice on the bracket (fig. 6).
In unoccupied premises it is recommended that the heating system
is switched off and isolated from the electrical supply.
Avoid exposing skin to the rays of the appliance for distances
less than 50 cm.
Avoid exposing eyes to the rays of the appliance for distances
less than 2.70 m.
This heating appliance does not feature a device to control ambient
temperature. Do not use it in small rooms used by people who are
unable to leave such rooms on their own unless they are under con-
stant surveillance.
All users should be made aware of all aspects of operation and safety
and these instructions should be retained for reference.
6. CLEANNESS
Every mainteinance operation should be done when the appliance
is disconnected from the power supply. Mo-El Girosole heaters con-
12