Auto Sleep Function; Backlight Operation - Adam Equipment AZ extra Serie Manual De Instrucciones

EN
3.8

AUTO SLEEP FUNCTION

This function may be enabled or disabled by the user. If enabled, when the scale
is not used for some time (as pre-set by the user under this function) it
automatically switches off. To set this parameter-
• During self-checking, press [Zero] and release at once. The display
shows "SLEEP nodE".
• Press [Print] key to scroll through the auto sleep values.
"0"
"1"
"5"
"10" Auto sleep after 10 minutes
• Press [Tare] to set the value. The scale returns to zero.
3.9

BACKLIGHT OPERATION

The backlight may be enabled or disabled by the user. If the backlight is disabled
the battery life will be maximised. With the backlight in operation the battery life
will be less depending on the extent at which the scale is used.
To set the backlight
• Press and hold the [Auto Clear] key for 4 seconds.
• Press the [Print] key to change the operation:
"EL" "
"EL" "
"EL" "
• Press [Tare] to store the setting.
Backlight operation
When the backlight is set from automatic control-
• It will only turn on when the scale is being used.
• It will be on when a weight is on the platform or when a key is pressed.
• It will turn off automatically after a few seconds when the weight is
zero or after a while, the last key was pressed.
© Adam Equipment Company 2011
Auto sleep mode disabled
Auto sleep after 1 minute
Auto sleep after 5 minutes
AU"
Automatic control of the backlight
on"
Backlight on full time
oFF"
Backlight turned off
12